Kofax Image Products VirtualReScan 4.0, Руководство по установке

Страница: 94 / 116

82 VRS Installation Guide
3
The Source Properties dialog box will display, similar to Figure A-2.
Figure A-2. Source Properties Dialog Box
4
Enter and select the following:
a
Enter a Source Name . This name is used to reference the scanner or source
device from your scanning application. You can assign any name, as long as
it fits within the naming conventions of your application. Typically, the
source name corresponds to the name of the scanner or source device, along
with a description of the source type. An example source name might be
“Scanner XYZ with ISIS Scanning,” where “Scanner XYZ” corresponds to
the make and model of the scanner.
b
Select a Source Type. The source types depend on the software and devices
(VRS, Adrenaline SCSI scanner controller, etc.) that are configured on your
system. Select the type that is appropriate for your installation. For more
information about source types, refer to the Kofax Web site at
www.kofax.com.
5
Click OK.