Kofax Image Products VirtualReScan 4.0, Руководство по установке

Страница: 81 / 116

VRS Installation Guide 69
2
If you want to scan or import images from disk, do the following:
a
To scan, make sure your scanner was connected and powered on before
your computer was started. Select Source | Scanner, select a scanner source,
and click OK.
b
To import images from disk, select Source | File Import. Select an import
source and click OK.
3
If you want to display an image (a source device is not required), select
File | Open. Select a file from the Open dialog box and click OK.
Note
A set of sample TIFF images (
SAMPLE1.TIF
,
SAMPLE2.TIF
, etc.) is
installed to your installation Bin folder. If you are importing images or opening
images from disk, you can select one of the sample images.
4
Use the toolbar and menus available on the sample application’s main screen to
select the desired options for your operation. Then, process your images as
desired. For example:
a
If you are scanning, you can select Source | Properties to select various
scanner settings. Then, load a batch of pages in your scanner and select
Source | Process Batch to process the batch.
b
If you are importing images from disk, you can select Source | Properties to
select various device options and select Source | Process Batch. Then, select
a file from the Open dialog box and click OK.
c
If you are displaying an image, you can select File | Print to print the image.
You can use any available option from the toolbar and menus. Options that are
not available for a particular operation will be dimmed. For details about the
VCDemo toolbar and menus, refer to Appendix C,
Using VCDemo on page 91.