Kofax Image Products VirtualReScan 4.0, Руководство по установке

Страница: 91 / 116

VRS Installation Guide 79
Appendix A
Creating or Configuring a Scan Source
Introduction
Each time that you start a scanning application, you select a scan source to ensure that
the appropriate drivers are used during your scanning session. If you have installed
VRS or an Adrenaline SCSI scanner controller, several scan sources are already
available for use with your scanning application.
You may need to use the Kofax Source Manager (KSM) to create an additional scan
source if one of the following situations is applicable to your installation:
• You are using VRS with a “compatible” scanner, which is a scanner that has not
gone through the VRS certification process. For more information, refer to VRS
Scanners: Certified vs. Non-Certified on page 4.
• You are using a Kofax Adrenaline SCSI scanner controller ( without VRS) with a
“compatible” scanner, and you want to create a source other than the default
source named “XYZ Scanner without SVRS.”
Note
When using Adrenaline 450 or 650 scanner controllers without VRS, you cannot
use VRS or AIPE sources without obtaining an additional license.
You can also use KSM to configure settings for an existing scan source. This appendix
explains the procedures for using KSM to create or configure a scan source.