38
VRS Installation Guide
USB and FireWire Installations
This section covers the general procedure for installing and configuring USB or
FireWire scanners with VRS. You should also refer to the manufacturer-provided
installation instructions because some scanners have unique requirements.
X
To install and configure USB or FireWire scanners
1
Do
one
of the following, as applicable:
• Plug in the USB cable from your scanner to the USB port on your computer.
• Plug in the FireWire cable from your scanner to the FireWire port on your
computer.
Windows will detect the device and launch the New Hardware Found wizard.
2
Follow the on-screen instructions to locate the necessary driver on the
installation CD supplied with your scanner.
3
Verify that the scanner is installed correctly. Refer to
Verify the Scanner
Connection
on page 40.
4
Review the
Post USB/FireWire Driver Installation Procedure
below.
5
Install your scanning application. Refer to
Install the Scanning Application
on
page 44.
6
Install VRS. For details, refer to
Install the VRS Software
on page 15.
Post USB/FireWire Driver Installation Procedure
Some scanners are designed to perform particular actions when certain events occur.
For example, some scanners are set to automatically launch the Microsoft scanning or
Содержание VirtualReScan 4.0
