Kofax Image Products VirtualReScan 4.0, Руководство по установке

Страница: 92 / 116

80 VRS Installation Guide
Creating a Scan Source
During the VRS installation process, you are presented with a list of certified scanners.
If your scanner does not appear on the list and a VRS Component Installer is not
available for your scanner, you should use the procedure in this section to create a
source that provides the drivers required to use the non-certified, “compatible”
scanner with VRS. For more information, refer to
VRS Scanners: Certified vs. Non-
Certified on page 4 or VRS Component Installers on page 5.
Note
To determine if a VRS Component Installer is available for your scanner, refer to
the Downloads Library link from the Support pages on the Kofax Web site.
You should also use the procedure in this section if you are using an Adrenaline SCSI
scanner controller
without VRS, and you require a scan source other than “XYZ Scanner
without SVRS,” which is created automatically during the Adrenaline installation
process.
X
To create a scan source
1
From the Windows Control Panel, launch the Kofax Source Manager (KSM)
and click Next when the KSM dialog box displays.