VRS Installation Guide
15
Install the VRS Software
This section explains how to install the VRS 4.0 software. If you currently have VRS 3.5
installed, you can successfully upgrade to VRS 4.0 without removing the existing
instance of VRS. If you have an earlier VRS version, you will need to upgrade to
VRS 3.5 before upgrading to VRS 4.0. For additional guidelines, refer to
Installation
Scenarios
on page 9 and to the
VRS Release Notes
in your product package.
X
To install the VRS software
1
Close all applications on the computer where you want to install VRS and make
sure that you are logged in as a user with Administrator permissions.
Note
Although Administrator permissions are required for the user who
performs the VRS installation, no special permissions are required to use the
VRS application.
2
Insert the VRS installation CD in the appropriate drive. The CD supports
AutoPlay, so the installation will automatically start (if it does not start, run
Setup.exe from the root folder of the installation CD).
If you do not have AutoPlay enabled, select Start| Run and do
one
of the
following:
• Type
D:\setup.exe
, where D: is the CD-ROM drive. Click OK.
• Click Browse, navigate to the CD-ROM drive, select
setup.exe
, and click
Open. From the Run dialog box, click OK.
The VRS installation will begin.
A successful VRS installation requires Microsoft .NET Framework 1.1, which
will be automatically installed if it does not already exist on your computer. If
Содержание VirtualReScan 4.0
