Kodak I5X50 SERIES Скачать руководство пользователя страница 54

Страница: 54 / 100

A-61848 / TWAIN October 2016

Delete —

allows you to remove the currently selected rule.

NOTE: Refer to “The Device Settings window” on page 39 for

information about common buttons and options.

Sorting - Patch window

From this window you can select all options for one patch rule.

NOTE: A patch can be used in only one rule. If the patch type has been

used in another rule, it will not be available.

Patch

— allows you to select the patch that must be recognized, for

this rule to be applied.

•

4 and Toggle

and

•

All

: indicates all remaining patches (i.e. any patch that is not already

used in another rule).

Delete patch image

— all images of the patch sheet will be discarded

and not sent to your application.

NOTES:

• When selected, the images are deleted no matter what other scanner

options are set to.

Choosing to delete the patch image means that a

host application will

not

be able to use a patch for document

separation.

• When not selected, other scanner options determine if the patch

image is deleted or not.

Destination

— indicates the output location for each patch sheet that

this rule is applied to.

Содержание I5X50 SERIES





































































































Результаты поиска

Содержание I5X50 SERIES

Отзывы:

Похожие инструкции для I5X50 SERIES

Бренды по названию

Популярные бренды

Kodak I5X50 SERIES, Руководство по установке

Результаты поиска

Содержание I5X50 SERIES

Отзывы:

Похожие инструкции для I5X50 SERIES

Бренды по названию

Популярные бренды