Kodak I5X50 SERIES, Руководство по установке

Страница: 20 / 100

16 A-61848 / TWAIN October 2016
• Remove : produces an image that contains just the document by
eliminating any residual border. Residual border can be caused by
variations in a document edge; for example, when a document is not
a perfect rectangle and/or was fed crooked.
NOTES:
•
While this option will not remove large amounts of residual
border, there is a possibility that a small amount of the document
will be lost.
• This option is only available when both Document:
Automatically Detect and Straighten and Image: Entire
Document are selected.
Post-scan rotation options — allows you to select any rotation to be
applied to the electronic image after is has been scanned.
• (none)
• Automatic — the scanner will analyze each document to determine
how it was fed and will rotate the image to the proper orientation.
• Automatic - default to 90: the scanner will analyze the content of
each document to determine how it was fed and will rotate the image
to the proper orientation. If the scanner cannot determine how the
document was fed, it will rotate the image 90 degrees.
• Automatic - default 180 : the scanner will analyze the content of
each document to determine how it was fed and will rotate the image
to the proper orientation. If the scanner cannot determine how the
document was fed, it will rotate the image 180 degrees.
• Automatic - default 270 : the scanner will analyze the content of
each document to determine how it was fed and will rotate the image
to the proper orientation. If the scanner cannot determine how the
document was fed, it will rotate the image 270 degrees.
• 90, 180, 270 degrees — the amount of rotation that will be
performed.
The following example shows how these settings effect a document
that was fed landscape:
Landscape Feed
Orientation
90
degrees
180
degrees
270
degrees