Kodak I5X50 SERIES, Руководство по установке

Страница: 81 / 100

A-61848 / TWAIN October 2016
77
Feature
• Patch Types 1, 4 and 6 — these patch types can be used by the
scanning application for post-scan image control. (They are not used
for image addressing.) For example, use these patch types for
workflow control, such as changing between black and white and
color/grayscale imaging.
NOTE: This option is only available when Format is set to Image
Address on the Indexing tab.
Use Heads — select which patch heads/readers you want to use. Each
patch head/reader can be turned on and off independently.
NOTE: This option is only available when Format is set to Image
Address on the Indexing tab.
Scanner — this option allows you to use a set of Scanner Control
patches. These patches are new patch patterns numbered from 10 -15
and are reserved for automatically controlling features of the scanner
by inserting patch pages into the batches of paper during document
preparation. For example, you may have a job that requires that you
scan envelopes that contain the pages you are scanning. The
envelopes trigger a multifeed that is slowing down your scanning
throughput. To avoid this, you can use the
Action when patch is
detected option in the scanning application to select one of the
Scanner Control patches and assign the Turn Off Multifeed – For One
Sheet option. If, for example, you select a Patch Type 10 you could
insert a Patch 10 sheet in front of the envelopes to prevent the scanner
from triggering a multifeed.
Select one of the following when a patch is detected:
• Turn Off Multifeed – For One Sheet : disables multifeed detection
for the page following the patch that is used to trigger this feature.
• Turn Off Multifeed – Between Patches: toggle a multifeed detection
off until another patch of the same kind is read. This feature can be
used if there is a group of documents together in the batch that would
trigger an undesired multifeed event.