Kodak I5X50 SERIES, Руководство по установке

Страница: 19 / 100

A-61848 / TWAIN October 2016
15
Outline — allows you to select the location and size to use for creating
your electronic image. The preview area will show the outline.
• Origin (x, y) :
- if you select Document: Automatically Detect and Straighten,
(x) this is the distance from the left edge of the document and (y)
is the distance from the top edge of the document.
- if you select Document: Manually Select (x) is the distance from
the left edge of the scanner’s paper path and (y) is the distance
from the first portion of the document detected by the scanner.
• Size (w, h) : if you select Document: Automatically Detect and
Straighten or Document: Manually Select , this is the width and
height of the electronic image.
NOTE: The electronic image may be shorter than you specified if the
outline goes beyond the end of the scanned document.
• Angle : allows you to select the angle of the outline.
• Predefined sizes : provides a list of commonly used paper sizes.
Selecting an item in this list will automatically set the size of the
outline to that paper’s size.
Custom will be displayed when the
outline size does not match any sizes in the list.
NOTE: You can also adjust the outline displayed in the preview area
using your mouse.
Border — allows you to select what action to perform on the edges of
your electronic image.
• (none)
• Add : includes up to approximately 0.25 cm (0.1 inches) of border
around all of the image edges.
NOTE: This option is only available for Document: Automatically
Detect and Straighten, Document: Automatically Detect
or Document: Manually Select .