Kodak I5X50 SERIES, Руководство по установке

Страница: 93 / 100

A-61848 / TWAIN October 2016
89
Appendix A Controlled Dual Stacking
Device - Stacking tab
The Stacking tab allows you to set options for separating documents
into the two stacks of the
Kodak Controlled Dual Stacking Accessory
output tray.
NOTES:
• The Stacking tab is only available when the Kodak Controlled Dual
Stacking Accessory has been enabled for your scanner.
• Stacking tab options are not supported on the i5x50S scanners.
On — turns stacking on and makes the rest of the options on this tab
available.
NOTE: Stacking also may be overridden to be On or Off from the
scanner’s Operator Control Panel.
Stack to put detected documents in : indicates which stack
documents matching the Detect Based On settings will be placed in.
All non-matching documents will be placed in the other stack.
NOTE: Because document weight and condition can impact the ability
of documents to stack optimally, it is recommended that when
you separate documents shorter in length than 6 inches/152
mm (e.g., checks) you place them in Stack #1; and when
separating documents longer than 6 inches/152 mm (e.g., patch
sheets) you place them in Stack #2.