Kodak I5X50 SERIES, Руководство по установке

Страница: 55 / 100

A-61848 / TWAIN October 2016
51
Sheets After The Patch To Sort — allows you to select which sheets
of paper, immediately following the patch sheet, will be sent to the
Destination you set up.
• (none)
• Specified Number : allows you to select an exact number of sheets
from 1 to 99 .
• All Until This Patch : indicates every sheet of paper is sent to the
Destination, up to the next sheet of paper when this rule's patch is
detected.
NOTE: Use this option if you have an unknown number of
consecutive pages in your document set that you want to
sort. In this case, obtain two patch sheets with this patch
type, then place one patch sheet before the pages to sort and
place the other patch sheet after the pages to sort.
• All Following : indicates every sheet of paper after the patch sheet is
sent to the destination, until the scanning session ends.
NOTES:
• Sorting that is in progress will continue until finished. So if you have a
rule to sort a specific number of sheets, and a second sorting rule is
met before that number of sheets has been sorted, the second rule
will be ignored.
• Sorting will be terminated by any of the following events:
- Stop scanning
- Multifeed that stops scanning
- Jam that stops scanning
Destination : the output location to deliver each sheet that this patch
sorting rule is applied to.
NOTE: Destination is available only when Sheets After The Patch To
Sort is not (none) .
OK — saves any changes and closes this window.
Cancel — closes this window without saving any changes.
Help : displays help information for this window
NOTE: If something happens during patch sorting that disables the
scanner (e.g. a multifeed that stops the scanner and ends the
job), then any Patch sorting rule in effect will be considered
completed. No further action will be taken based on that rule.