Knick SensoGate WA131MH Скачать руководство пользователя

Страница: 23 / 60

SensoGate WA131MH

5 Operation

5.1 Moving into the PROCESS Position

Note:

When the PROCESS position is reached, this will be indicated in different ways, depending on

the SensoGate WA131MH version.

➜

Limit Positions, p. 18

Note:

The safety lock button pops out when the PROCESS position is reached (see detail B). Only if the

safety lock button has popped out is the function of the safeguard “Immersion lock without a
mounted sensor” ensured.

➜

Safeguards, p. 6

SERVICE

PROCESS

01.

Mount the sensor.

➜

Installing and Removing a Sensor, p. 25

Note:

When the rotary movement starts, the safety lock button is automatically depressed.

02.

Depress the safety lock button

(2)

(see detail A) and rotate the rotating collar

(1)

clockwise.

✓

The safety lock button

(2)

pops out when the PROCESS position is reached (see detail B).

✓

Rotating collar

(1)

is locked to prevent rotation.

Содержание SensoGate WA131MH





























































Результаты поиска

Содержание SensoGate WA131MH

Отзывы:

Похожие инструкции для SensoGate WA131MH

Бренды по названию

Популярные бренды

Knick SensoGate WA131MH, Руководство пользователя

Результаты поиска

Содержание SensoGate WA131MH

Отзывы:

Похожие инструкции для SensoGate WA131MH

Бренды по названию

Популярные бренды