Knick SensoGate WA131MH Скачать руководство пользователя

Страница: 22 / 60

SensoGate WA131MH

4 Commissioning

WARNING! Process medium may leak from the SensoGate WA131MH in the event of damage

or improper installation, and may contain hazardous substances.

Follow the safety instructions.

➜

Safety, p. 5

Note:

Upon request, Knick Elektronische Messgeräte GmbH & Co. KG will provide safety instruction

and product training during initial commissioning of the product. More information is available from
the relevant Knick representatives.

01.

Install the SensoGate WA131MH.

➜

Retractable Fitting: Installation, p. 20

02.

Install the outlet hose.

➜

Outlet Hose: Installation, p. 21

03.

Optional: Install the inlet hose.

➜

Inlet Hose: Installation, p. 21

04.

Mount the sensor.

➜

Installing and Removing a Sensor, p. 25

05.

Ensure that the process connection is securely fastened.

06.

Optional: Ensure that installed safety accessories (e.g., ZU0818 retainer clamp) are securely fas-
tened.

➜

Safety Accessories, p. 7

07.

Optional: Ensure that the SensoGate WA131MH-X is correctly connected to the plant’s equipoten-
tial bonding system.

➜

Operation in Explosive Atmospheres, p. 8

08.

Move the SensoGate WA131MH into the PROCESS position.

➜

Moving into the PROCESS Position, p. 23

✓

Safety lock button pops out when the PROCESS position is reached.

✓

Rotating collar is locked to prevent rotation.

09.

Move the SensoGate WA131MH into the SERVICE position.

➜

Moving into the SERVICE Position, p. 24

✓

Safety lock button pops out when the SERVICE position is reached.

✓

Rotating collar is locked to prevent rotation.

10.

Check the SensoGate WA131MH for leaks under process conditions.

✓

SensoGate WA131MH and connections have no leaks.

Содержание SensoGate WA131MH





























































Результаты поиска

Содержание SensoGate WA131MH

Отзывы:

Похожие инструкции для SensoGate WA131MH

Бренды по названию

Популярные бренды

Knick SensoGate WA131MH, Руководство пользователя

Результаты поиска

Содержание SensoGate WA131MH

Отзывы:

Похожие инструкции для SensoGate WA131MH

Бренды по названию

Популярные бренды