Knick SensoGate WA131MH Скачать руководство пользователя | Manualshive

Страница: 14 / 60

background image

SensoGate WA131MH

14

2.4 Symbols and Markings

Special conditions and danger points! Observe the safety information and instructions on safe use of the
product as outlined in the product documentation.

CE marking with identification number of the notified body involved in the production control.

ATEX marking

1)

of the European Union for operation of SensoGate WA131MH-X in explosive atmos-

pheres.

Operation in Explosive Atmospheres, p. 8

IP66 protection: The product is dust-tight and offers complete protection against contact as well as pro-
tection against strong water jets.

Safety lock button marked “PRESS”. Used to unlock the SensoGate WA131MH at the limit positions for the
purpose of moving to the SERVICE or PROCESS position.

Symbol indicating the direction of rotation to move the SensoGate WA131MH to the PROCESS position.

Moving into the PROCESS Position, p. 23

Symbol indicating the direction of rotation to move the SensoGate WA131MH to the SERVICE position.

Moving into the SERVICE Position, p. 24

Outlet symbol marking the outlet port of the SensoGate WA131MH.

Inlet symbol marking the inlet port of the SensoGate WA131MH.

2.5 Design and Function

SensoGate WA131MH consists of two main assemblies:

• Drive unit

• Process unit

The drive unit is connected to the process unit with a coupling nut. The drive unit and process unit can
be separated.

Drive Unit: Disassembly, p. 31

Various different versions of drive and process unit can be combined.

Permissible Changes, p. 17

The process connection is used to fasten the SensoGate WA131MH to the process port.

Manually rotating the rotating collar makes the drive unit move SensoGate WA131MH to the SERVICE
or PROCESS position.

Limit Positions, p. 18

1)

Availability is dependent on the ordered version.

Product Code, p. 11

«
...
12
13
14
15
16
...
»

Содержание SensoGate WA131MH





























































Отзывы:

Нет отзывов

Похожие инструкции для SensoGate WA131MH

Бренд: NEC Страницы: 29

Бренд: Cannon Страницы: 40

Бренд: NARGESA Страницы: 34

Бренд: Rain-Flo Irrigation Страницы: 16

Бренд: Datavideo Страницы: 48

Бренд: Datavideo Страницы: 34

Бренд: Datavideo Страницы: 3

Бренд: Datavideo Страницы: 34

Бренд: Datavideo Страницы: 8

Бренд: Datavideo Страницы: 10

Бренд: DBX Bushido Страницы: 12

Бренд: Harken Страницы: 4

Бренд: Harken Страницы: 2

TERRA FORCE BOOM

Бренд: Hardi Страницы: 40

Бренд: Harken Страницы: 4

QuickSlide HemaPRO

Бренд: Hardy Diagnostics Страницы: 2

Бренд: Hardt Страницы: 2

Lab companion SI-300

Бренд: Jeio tech Страницы: 69

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды