49
Parameter
Default
Selection / Range
Cal preset values
• Calimatic buffer
• Drift check
• Cal timer
Monitoring
Calibration timer
Adaptive cal timer
• Tolerance band check
(SW 3400-005/FW 4400-005)
Knick CaliMat: 2.00 4.00 7.00 9.00 12.00
(Merck/Riedel: 2.00 4.00 7.00 9.00 12.00)
Mettler-Toledo: 2.00 4.01 7.00 9.21
DIN 19267:
1.09 4.65 6.79 9.23 12.75
NIST Standard: 4.006 6.865 9.180
NIST Technical: 1.68 4.00 7.00 10.01 12.46
Hamilton:
2.00 4.01 7.00 10.01 12.00
Kraft:
2.00 4.00 7.00 9.00 11.00
Hamilton A:
2.00 4.01 7.00 9.00 11.00
Hamilton B:
2.00 4.01 6.00 9.00 11.00
HACH:
4.01 7.00 10.00
Ciba:
2.06 4.00 7.00 10.00
Reagecon:
2.00 4.00 7.00 9.00 12.00
Table
Fine:
1.2 mV/min (Abort after 180 sec)
Standard:
2.4 mV/min (Abort after 120 sec)
Coarse:
3.75 mV/min (Abort after 90 sec)
Auto
Off, entry
Off, On
Tolerance adjustment: Off, On
Tolerance band zero +00.20 pH (entry)
Tolerance band slope +002.0 mV/pH (entry)
Knick CaliMat
Standard
Auto
0000h (Off)
Off
Off
Parameter Setting
Cal preset values
Note: Function check (HOLD) mode active
Tolerance adjustment
(add-on function SW3400-005 / FW4400-005
1)
)
During calibration this function checks the zero and slope values and automatically
performs an adjustment when the tolerance band is exceeded.
The parameters are stored in the tolerance band recorder (Diagnostics menu).
The add-on function SW3400-005 / FW4400-005 is device-specific. When ordering this
function, you therefore have to specify the serial number of your FRONT module in
addition to the respective order number.
(The FRONT module contains the Protos system control).
The manufacturer then supplies a TAN (transaction number) to release the add-on func-
tion in the system control menu.
1) Protos II 4400(X): FW4400-005 only available from
FRONT firmware version
02.xx.xx
N
ot
e:
The menus ma
y v
ar
y depending on the devic
e v
ersion
Содержание Protos II 4400
