Knick MemoTrans Скачать руководство пользователя

Страница: 8 / 56

MemoTrans

3 Incoming Acceptance and Product Identification

3.1 Incoming Acceptance

01.

Verify that the packaging is undamaged.

✓

Notify the supplier of any damage to the packaging. Keep the damaged packaging until the
issue has been resolved.

02.

Verify that the contents are undamaged.

✓

Notify the supplier of any damage to the delivery contents. Keep the damaged goods until the
issue has been resolved.

03.

Check that the delivery is complete and nothing is missing.

✓

Compare the shipping documents with your order.

04.

Pack the product for storage and transportation in such a way that it is protected against impact
and moisture.

✓

The original packaging offers the best protection. Make sure to comply with the permitted
ambient conditions.

If you have any questions, please contact your supplier or local sales center.

3.2 Product Identification

3.2.1 Nameplate

The nameplate contains the following information:

• Manufacturer identification

• Serial number

• Safety information and warnings

• Ex labeling on hazardous area versions

• Certificate information

Compare the data on the nameplate with your order.

3.3 Package Contents

The package contents include:

• 2-wire compact transmitter

• Installation Guide

If you have any questions, please contact your supplier or local sales center.

3.4 Certificates and Approvals

3.4.1 CE Mark

The product meets the requirements of the harmonized European standards. As such, it complies
with the legal specifications of the EU directives. The manufacturer confirms successful testing of
the product by affixing to it the CE mark.

Содержание MemoTrans

























































Результаты поиска

Содержание MemoTrans

Отзывы:

Похожие инструкции для MemoTrans

Бренды по названию

Популярные бренды

Knick MemoTrans, Руководство пользователя

Результаты поиска

Содержание MemoTrans

Отзывы:

Похожие инструкции для MemoTrans

Бренды по названию

Популярные бренды