KNEGT 504G3 Series, Руководство по эксплуатации

Страница: 11 / 111

504G3
SERIES TRACTOR OPERATION MANUAL
9
the tractor is being backed up.
4. Never activate the power take-off (PTO) when it is connected to a moving
implement, without previously making sure that no one is within operating range of
this implement.
5. You can be injured if you use faulty lifting equipment. Make sure that lifting
equipment is in good condition. Make sure that lifting tackle complies with all local
regulations and is suitable for the job. Make sure that lifting equipment is strong
enough for the job. Raised equipment can fall and injure you. Do not walk or work
under raised equipment unless safely supported.
6. No standing on the 3-point hitch or the shield. It
may cause accident.
1.1.6 Parking and leaving the tractor
1. Before dismounting, disengage PTO, move
transmission control lever to neutral, stop engine,
lower implements or attachments to ground and
securely engage the park brake. In addition, if
the tractor is left unattended, remove key.
2. When parking look for level grounds if any, shift
into gear and lock the park brake. On sloping
grounds in addition to locking the park brake,
shift into first forward gear if uphill or into first
reverse gear if downhill. For greater safety also use the specific stopping wedge
(available on request); be sure to do so if parking your tractor with a trailer.
1.1.7 Tractor Maintenance
1. Allow engine to cool off sufficiently before
removing the radiator cap. With the engine
shut-off, slowly turn the cap and release pressure
before removing it completely.
2. Disconnect the storage battery ground cable before
starting to work on any of the electrical system’s