KNEGT 504G3 Series Скачать руководство пользователя страница 4

Страница: 4 / 111

504G3

SERIES TRACTOR OPERATION MANUAL

Read the Operation Manual carefully before starting, using,

maintaining, refueling or making other service interventions on

the tractor. Comply strictly with the safety regulation and follow

the suggested precautions in order to safeguard yourselves. If

you are unsure about anything, ask your East Wind dealer or

employer. Do not guess, others and you could be killed or

seriously injured.

Many warming sign alerts such as ‘

’ on the tractor and

operation manual. This warning sign alerts you about important

messages involving your safety. Read these safety rules

attentively and strictly follow suggested precautions to avoid

any potential danger and ensure your health and personal

safety.

In order to meet users’ needs continuously, this tractor is subject

to improvement without notice. It may happen to the fact that there

are some differences between the manual/illustrated parts catalogue

and the structure of the real tractors. So the dealers or users are

requested to provide PIN number and manufacturing date of the

tractor while placing order for spare parts.

Thank you for purchasing the

KNEGT

Brand Tractor and

cordially welcome your advice, suggestions and comments on

our product so that we can make improvements timely in future.

Knegt Quality Tractor Europe

September

2018

Содержание 504G3 Series
















































































































Результаты поиска

Содержание 504G3 Series

Отзывы:

KNEGT 504G3 Series, Руководство по эксплуатации, Страница: 4 / 111

Результаты поиска

Содержание 504G3 Series

Отзывы: