48
Chapter
Ⅲ
Routine Maintenance
Service Requirements
Introduction
Your machine has been designed and built to give maximum performance, economy and
ease of use under a wide variety of operating conditions. Prior to delivery, your machine
was inspected both at the Factory and by your Distributor to ensure that it reaches you in
optimum condition. To maintain this condition and ensure trouble free operation it is
important that the routine services, as specified in this Manual, are carried out by an
approved KNEGT Distributor at the recommended intervals.
This section of the Manual gives full details of the service requirements necessary to
maintain your KNEGT machine at peak efficiency.
It can be seen from the Service Schedules on the following pages that many essential
service checks should only be carried out by a KNEGT trained specialist. Only KNEGT
Distributor Service Engineers have been trained by KNEGT to carry out such specialist
tasks, and only KNEGT Distributor Service Engineers are equipped with the necessary
special tools and test equipment to perform such tasks, thoroughly, safely, accurately and
efficiently.
KNEGT regularly updates its Distributors advising them of any product developments,
changes in specifications and procedures. Therefore only a KNEGT Distributor is fully
able to maintain and service your machine.
A Service Record Sheet or Book is provided which will enable you to plan your service
requirements and keep a service history record. It should be dated, signed and stamped by
your Distributor each time your machine is serviced
Remember, if your machine has been correctly maintained, not only will it give you
improved reliability but its resale value will be greatly enhanced.
Owner/Operator Support
KNEGT together with your Distributor wants you to be completely satisfied with
your new KNEGT machine. If you do encounter a problem however, you should contact
your Distributor's Service Department who are there to help you!
You will have been given the names of the relevant service contacts at your Distributor
when the machine was installed.
To get the most from your Distributor please help them to satisfy you by:
1. Giving your name, address and telephone number.
2. Quoting your machine model and serial number.
3. Date of purchase and hours of work.
