43
Working on Slopes
WARNING
Failure to observe these precautions may cause the machine to become
unstable and in extreme circumstances will overturn with potential
serious injury to the operator.
Uneven Terrain
Pre-plan your movement over uneven terrain. Avoid wheel slippage and spinning.
Pass diagonally through sharp dips. Avoid sharp drop off's completely.
Avoid sudden starts and stops while travelling up or down hill, travel at a slow speed
while turning.
Towing with the Machine
The machine is fitted with a drawbar A
for towing implements, trailers etc.
The machine is designed for light duty pulling
applications only. Do not exceed the maximum
vertical load of approximately TBA kg
(TBA lb).
When towing with the machine, the three point
linkage must be in the raised position.
Operating the Three Point Linkage
Adjusting the Telescopic Stabilizers
The stabilizers A prevent (or limit)
implement side movement.
To adjust the length of the stabilizers,
remove the pin and, using a tommy bar,
turn the turn buckle barrel until the
required length is achieved.