Knauer Smartline Pump 1000, Руководство пользователя

Страница: 11 / 95

10 Control of the Smartline Pump 1000
backflushing, follow the instructions given in the section
“Automatic piston Backflushing” on page 20.
Appearance of the Cursor
The green arrow keys on the foil key touchpad can be used for
positioning the blinking cursor on any field of the menu screen.
The cursor appears as an underscore character while entering values
(see Fig. 6, below). Refer to SOP 2 “Entering Data” on page 11 for
guidelines on how to use the numeric keypad for data input (item {2.3} in
Fig. 3).
Fig. 6 Blinking Cursor Cursor during data input
Menu Structure of the Smartline Pump 1000
The display of the Smartline Pump 1000 has one main menu screen
which shows the status information of the instrument. From the main
menu screen, four additional menu screens are accessible.
By default, the Smartline Pump 1000 main menu screen displays the
parameters of the first program line of the currently active program.
An example of the main menu screen is shown below in Fig. 7 “Menu
Structure of the Smartline Pump 1000”.
01 -- 001.0 000 0 0 0 0 0 0 0 0
OFF 000.00
Load Edit Prog Flow Pressure Events
Prog Clear 0 [ml/min] [0.1 Mpa] off 0 on 1
2
Hold 0 Time %A %B %C %D
Run 1 [min]
Setup
GLP Link
View
LINK Menu
VIEW Menu
SETUP Menu
GLP Menu
Fig. 7 Menu structure of the Smartline Pump 1000
SOP 1 Selecting Menus
This SOP applies to the Smartline Pump 1000 Firmware Version 1.0X or
higher. Use this SOP to select menu screens for viewing and setting
pump parameters.
The four menus of the Smartline Pump 1000 can be accessed with the
following procedure:
1. Place the cursor in a field in one of the four corners of the main
screen, e.g. on
OFF
in the lower left corner of the main menu.
2. Depending on the selected corner, press the corresponding left or
right arrow key for longer than 2 seconds. In the example above,
selection of the
½
key will activate the VIEW Menu on the display.
3. Select the rhombus

in the lower left corner of the display if you
want to access additional pages of the selected menu. You can
access all menu pages by scrolling using the À or ¿ arrow keys.
4. Select the rhombus  and use ¾ or ½ to return to the main screen.