Unpacking and setup
10
AZURA® Valve Unifier VU 4.1 Instructions V6855
Mounting the valve onto the valve drive
Tools
: Screwdriver, TX 10
Connecting the device to the computer
Note: IHPLC devices made by KNAUER work only with IP adresses
which are assigned via IPv4. IPv6 is not supported.
This section describes how to set up an HPLC system in a local area network
(LAN) and how a network administrator can integrate this LAN into your com-
Process
Figure
1. Using the screwdriver, loosen
the screws
1
of the adapter
2
.
2. Mount the valve
4
onto the drive
axle
3
. The port 1 of the valve has
to point up.
3. Using the screwdriver, tighten
the screws
1
of the adapter
2
.
4
3
2
1
