Operation
26
AZURA® Valve Unifier VU 4.1 Instructions V6855
Input
In this submenu, the control can be switched from manual from binary (see
“Binary code” on p. 16).
IP address
1. In the LAN Setup display, select the submenu IP Addr
with the navigation buttons.
2. Press selection button.
3. Using the navigation buttons, navigate to the value
that has to be changed.
4. Finish the process with pressing the confirmation but-
ton.
Netmask
1. In the LAN Setup display, select the submenu
Netmask with the navigation buttons.
2. Press selection button.
3. Using the navigation buttons, navigate to the value
that has to be changed.
4. Finish the process with pressing the confirmation but-
ton.
Gateway
1. In the LAN Setup display, select the submenu Def
with the navigation buttons. Choose GW.
2. Press selection button.
3. Using the navigation buttons, navigate to the value
that has to be changed.
4. Finish the process with pressing the confirmation but-
ton.
Process
Figure
1. Change to Input display: Main Display > Drive Setup
> In.Pins
2. Press selection button.
3. Change the setting (Inputs/BinCode) via the naviga-
tion buttons.
4. Finish the process with pressing the confirmation but-
ton.
Process
Figure
IP Addr
19
2
.168»
NetMask
25
5
.255»
Def.GW
19
2
.168»
In.Pins
Input
s
