Safety for users
6
AZURA® Valve Unifier VU 4.1 Instructions V6855
Eluent lines: Install capillaries and hoses in such a way that liquids cannot
get into the interior in case of a leak.
Leaks: Regularly check if any system components are leaking.
Power cable: Defective power cables are not to be used to connect the
device and the mains power.
Self-ignition point: Only use eluents that have a self-ignition point higher
than 150 °C under normal ambient conditions.
Power strip: If several devices are connected to one power strip, always
consider the maximum power consumption of each device.
Power supply Only connect devices to voltage sources, whose voltage
equals the device's voltage.
Toxicity Organic eluents are toxic above a certain concentration. Ensure
that work areas are always well-ventilated! Wear protective gloves and
safety glasses when working on the device!
Where is use of the device prohibited?
Never use the system in potentially explosive atmospheres without appropri-
ate protective equipment. For further information, contact the Technical Sup-
port of KNAUER.
Securely decommissioning the device
At any time, take the device completely out of operation by pulling the power
plug from the power supply (wall mounted connector or power strip).
Opening the module
The device may only be opened by the KNAUER Technical Support or any
company authorized by KNAUER.
Signal words
Possible dangers related to the device are distinguished in personal and
material damages.
danger to life probable
(moderately) severe injuries possible
light injuries possible
device defect possible
Decontamination
Contamination of devices with toxic, infectious or radioactive substances
poses a hazard for all persons during operation, repair, sale, and disposal of a
device.
