Operation
24
AZURA® Valve Unifier VU 4.1 Instructions V6855
Setting the valve position
Depending of the setting in Confirmation Mode, the valve position can be set
immediately (OFF) or after confirmation (ON).
Setting the valve position immediately
Setting the valve position after confirmation
Maximum
Pressure
Information of the maximum pressure
of the mounted valves
Part Number Part number of the mounted valve
Process
Figure
1. In main display, set the position via the navigation
buttons.
2. Let go of the navigation button. The position is set
immediately.
Process
Figure
1. Change to Confirmation Mode: Main Display > Drive
Setup > Confirmation Mode
2. Press selection button.
3. Use the navigation buttons to set the setting from
OFF to ON.
4. Finish the process with pressing the confirmation but-
ton.
5. Change to main display.
6. Use the navigation buttons to set a value for the posi-
tion.
7. Confirm the selection by pressing the confirmation
button.
Menu
Explanation
Figure
PMax
200 bar
Part# EV
X35XXXX
POS
1 / 4
W
Confirm
mode of
f
POS
1 / 4
W
