25
Operation
AZURA® Valve Unifier VU 4.1 Instructions V6855
Setting the valve drive control
LAN control
In this submenu is set whether the LAN control is set to manual or via DHCP.
IP Port
In this submenu, the IP port can be set manually.
LAN settings
In this submenu, the IP adress, netmask and gateway can be set manually.
Process
Figure
1. Change to control display: Main Display > Drive
Setup > Control
2. Press selection button.
3. Change the setting (DHCP/MANL) via the navigation
buttons.
4. Finish the process with pressing the confirmation
button.
Process
Figure
1. Change to IP port display: Main Display > Drive Setup
> IP Port
2. Press selection button.
3. Using the navigation buttons, navigate to the value
that has to be changed.
4. Press selection button.
5. Using the navigation buttons, set the digit.
6. Finish the process with pressing the confirmation but-
ton.
Process
Figure
1. Change to LAN Setup display: Main Display > Drive
Setup > LAN Setup
2. Press selection button.
3. Using the navigation buttons, navigate to the value
that has to be changed.
4. Press selection button.
Control
LAN MAN
L
IP Port
1000
1
LAN
SETUP
