Knauer Azura P 2.1L, Руководство пользователя

Страница: 33 / 44

P 2.1L user manual V6840, version 3.6
30 Troubleshooting
Line in time table is
empty Edit the program line.
Link is loaded First unload the link then change the link or
delete it.
Link is running Wait until the link has been completed, then
change the link or delete it.
M Max. flow limit
reached Confirm, pump continues running
Maximum pres-
sure! System
stopped

Reduce the pressure or adjust the upper pres-
sure limit.

Restart the system
Minimum pressure!
System stopped

Increase the pressure or adjust the lower
pressure limit.

Restart the system
Motor failure: max
current Switch the device off and on. Inform the techni-
cal support of the manufacturer in case the sys-
tem message repeats itself.
N No gradient is avail-
able in isocratic
mode Change the setup settings or change the gradi-
ent in the program or in
setup
.
No link available Create a link and edit it.
No link available.
Pls edit link first Create a link and edit it.
No time table to
start Edit the data by means of the chromatography
software.
Non-existing com-
ponent is set to
non-0 value Switch on the channel or edit the data using the
chromatography software.
P Program does not
exist Create a program.
Program is running Quit program or wait until program has been
completed.
Program not com-
patible with pump
head Modify the program or replace the pump head.
S Sum of compo-
nents is not 100 Change the entry.
T This link is used in
WAKEUP First quit or delete wakeup program (wu = Wake
Up), then edit or delete link.
This program is
used in a link First pause or delete the link, then edit or delete
data by means of the chromatography software.
This program is
used in WAKEUP First quit or delete wakeup program (wu = Wake
Up), then edit or delete data by means of the
chromatography software.
System message Solution