Knauer Azura P 2.1L, Руководство пользователя

Страница: 31 / 44

P 2.1L user manual V6840, version 3.6
28 Troubleshooting
System Messages
If other system messages are displayed besides those listed below, please
turn the device off and then on. Inform the Technical Support of the manu-
facturer in case the system message repeats itself.
The system messages are in alphabetical order:
System message Solution
A Auto pump head
type: head data
uninitialized!

Switch the device off and on

Check whether a pump head with RFID rec-
ognition has been installed

Repeat the automatic configuration step in
the chromatography software

Remove pump head, clean it and install it
again
Auto pump head
type: no valid head
detected!

Switch the device off and on

Check whether a pump head with RFID rec-
ognition has been installed

Repeat the automatic configuration step in
the chromatography software

Remove pump head, clean it and install it
again
Auto pump head
type: RFID hard-
ware not present or
failed! Pump head without RFID detection: If necessary,
replace pump head.
Auto pump head
type: read failed!

Switch the device off and on

Repeat the automatic configuration step in
the chromatography software

Remove pump head, clean it and install it
again

Inform the Technical Support of the manufac-
turer in case the system message repeats
itself.
Auto pump head
type: write failed!

Switch the device off and on

Repeat the automatic configuration step in
the chromatography software

Remove pump head, clean it and install it
again

Inform the Technical Support of the manufac-
turer in case the system message repeats
itself.
C Cannot edit pro-
gram from the run-
ning link First stop the link and then edit the data on the
device display or with the chromatography soft-
ware.
Cannot delete
active program/link First pause link, then delete program.
Cannot edit pro-
gram from the run-
ning link First pause link, then edit data using chromatog-
raphy software.