Klimaire Ecosaire CM Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 106 / 107

Ecos aire
®
CM Series Precision Air Conditioner Owners Manual
106 Ecos aire ® July 2007
Data subject to change without notice.
CHECKS
1. Have a qualified HVAC engineer
check that the humidifier capacity
is adequate to the load.
2. Check for changes in humidifica-
tion load since design stage.
3. If the humidifier capacity is ade-
quate, check the magnitude of
the humidity band.
1. Have a qualified HVAC engineer
check that the dehumidification
capacity is adequate to the load.
2. Check for changes in humidity
load since design stage.
CORRECTIONS
• If the humidifier capacity is not sufficient,
contact the factory for solutions.
• Close any doors or windows that have been left
open.
•
Check for excessive makeup airflow.
•
Contact factory.
•
If the dehumidification capacity is not sufficient,
contact the factory for solutions.
•
Close any doors or windows that have been left
open.
•
Check for excessive makeup air flow.
•
Contact factory.
SYMPTOM
In humidification mode,
the room relative humidity
does not rise to the set
point.
In dehumidification
mode, the room relative
humidity does not fall to
the set point.
Operation Diagnostics
OPERA
TION