KitchenAid KBFA20ER Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 68

background image

6-2

FORCED DEFROST MODE

The forced defrost function is performed using the Freezer display and Refrigerator keypad. En-
ter the Forced Defrost Mode by performing the following sequence of events:
1.   Open the Fresh Food door and press and hold the Door Alarm Keypad.
2.   Press and hold Refrigerator Temperature Down Keypad.
3.   Release the Door Alarm Keypad and wait 3 seconds. Fd appears in left display.

4. Press the Refrigerator Down Keypad again. SH appears in right display.
5. Press the Refrigerator Down Keypad again to force defrost. Fd and SH will flash in the dis-

play indicating that the unit is in defrost.

SERVICE TEST MODE

The service test functions are performed using the refrigerator display and keypad. Enter the
Service Test Mode by performing the following sequence of events.
1.   Open the Fresh Food door and press and hold the Door Alarm Keypad.
2.   Press and hold Refrigerator Temperature Up Keypad.
3.   Release the Door Alarm Keypad and wait 3 seconds.

OptimIce

Push for 3 seconds to

reset water filter light

Filter

Reset

Holiday

Mode

Order Replace

Temp

Alarm

Door

Alarm

Max

Cool

Freezer

Refrigerator

4.   Press the Refrigerator Up Keypad again.
5.   Display will show 001 in left display and numeric or dashes in right display.
6.   Press Freezer Up Keypad and Freezer Down Keypad to toggle through Service Test num-

bers.

7. Exit the test mode by closing the refrigerator door, or leave the unit unattended for 4 minutes

and it will exit the test mode automatically.

SERVICE TEST – 101 DEFROST HEATER & DEFROST CIRCUIT

Press the Refrigerator Up Keypad and Refrigerator Down Keypad to energize or de-energize
the Defrost circuit. The display will read OFF when de-energized, OP when energized with
open defrost thermostat, and CL when energized with closed defrost thermostat.

SERVICE TEST – 102 COMPRESSOR / CONDENSER FAN

Press the Refrigerator Up Keypad and Refrigerator Down Keypad to toggle Compressor/Con-
denser fan On and Off.

•

•

OptimIce

Push for 3 seconds to

reset water filter light

Filter

Reset

Holiday

Mode

Order Replace

Temp

Alarm

Door

Alarm

Max

Cool

Freezer

Refrigerator

«
...
52
53
54
55
56
...
»

Содержание KBFA20ER





































































Отзывы:

Нет отзывов

Похожие инструкции для KBFA20ER

Бренд: Haier Страницы: 34

Бренд: Carter Hoffman Страницы: 9

Бренд: Kemot Страницы: 16

Бренд: Imbera Страницы: 3

Бренд: Brandt Страницы: 13

BSA-A128S Series

Бренд: DIMCHAE Страницы: 32

Бренд: Fagor Страницы: 1

Бренд: Kelvinator Страницы: 80

Бренд: Ariston Страницы: 32

Бренд: Qilive Страницы: 180

Бренд: BORETTI Страницы: 44

Бренд: Summerset Страницы: 14

Бренд: Miele Страницы: 40

Бренд: Miele Страницы: 52

Бренд: Miele Страницы: 44

Бренд: Miele Страницы: 52

Бренд: Miele Страницы: 32

K 28202 D edt/cs

Бренд: Miele Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды