manualshive.com logo in svg

KitchenAid KBFA20ER, Техническое образование

Поделиться
Скачать
KitchenAid KBFA20ER Скачать руководство пользователя страница 20

3-4

PRODUCT OPERATION

USER INTERFACE FEATURES

MAX COOL

The max cool feature assists with periods of 
high  refrigerator  use,  full  grocery  loads,  or 
temporarily warm room temperatures.

Press  the  Max  Cool  touchpad  to  set  the 
freezer and refrigerator to the lowest tempera-
ture settings. Press the Max Cool touchpad 
again  to  return  to  the  normal  refrigerator 
setpoint.

NOTE: 

The Max Cool feature will automatically 

shut off in approximately 12 hours.

OPTIMICE

®

 FEATURE

The OptimIce

®

 feature assists with temporary 

periods  of  heavy  ice  use  by  increasing  ice 
production.

Press the OptimIce

®

 feature touchpad to set 

the freezer to the lowest temperature setting.  
Press the OptimIce

®

 feature touchpad again 

to return to the normal freezer setpoint.

NOTE:

  The  OptimIce

®

  feature  will  automati-

cally shut off in approximately 24 hours.

HOLIDAY MODE

In Holiday Mode, the freezer will not automati-
cally defrost as often to conserve energy.

Press the Holiday Mode touchpad until the 
indicator  light  is  lit  to  turn  on  this  feature. 
Press  the  Holiday  Mode  touchpad  again, 
or open the refrigerator door to turn off this 
feature.

NOTE:

 The refrigerator door may be opened 

within 1 hour of setting Holiday Mode without 
turning off the feature.

•

•

•

OptimIce

Filter

Reset

Holiday

Mode

Order Replace

Temp

Alarm

Door

Alarm

Max

Cool

Freezer

Refrigerator

USER INTERFACE

TEMP ALARM

The Temperature Alarm combines power out-
age and warm alarm features.

POWER OUTAGE

During a power outage, if the temperatures in the 
refrigerator and freezer compartments exceed 
normal  operating  temperatures,  the  highest 
temperature reached will be displayed.

Press  the  Temp  Alarm  touchpad  until  the 
indicator light is lit, to turn on this feature. 
Press and hold Temp Alarm for 3 seconds 
until  the  indicator  light  goes  off  to  turn  off 
this feature.

WARM ALARM

An alarm will sound repeatedly if the freezer or 
refrigerator compartment temperatures exceed 
normal operating temperatures for an hour or 
more.
The temperature displays will alternately show 
the current temperatures and the highest tem-
peratures the compartments reached when the 
power was out.

Press  the  Temp  Alarm  touchpad  once  to       
stop the audible alarm and alternating tem-
perature displays. The Temp Alarm light will 
continue to flash until the refrigerator tem-
perature stabilizes.

DOOR ALARM

The Door Alarm feature sounds a chime every 
few  seconds  when  the  refrigerator  door  has 
been left open for 5 continuous minutes. The 
chime will sound until the door is closed or Door 
Alarm is turned off.

Press the Door Alarm touchpad to turn this 
feature on or off. The indicator light will be lit 
when the Door Alarm feature is on.

•

•

•

Содержание KBFA20ER





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды