KitchenAid KBFA20ER Скачать руководство пользователя страница 27

Страница: 27 / 68

4-5

REMOVING THE WATER DISPENSER SWITCH ASSEMBLY

Electrical Shock Hazard

Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.

1.  Unplug refrigerator or disconnect power.
2.  Turn off the water supply to the refrigerator.
3.  Open the refrigerator compartment doors

and remove any items from around the
water dispenser switch.

Water Dispenser

Switch

4. Slide the water dispenser screw cover up

and remove it.

5. Remove the hex-head screw from the

water dispenser.

Water Dispenser

Screw Cover

6. Pull the top of the water dispenser out

and remove the water dispenser from the
liner.

7. Disconnect the two wires from the dis-

penser switch terminals.

8. Push and release the locking tabs on

the water dispenser switch, and pull the
switch off the housing pins.

Screw

Water Dispenser Switch

Tabs

2 RD-WH

9. Disconnect the end of the water dispens-

er tube at the quick-disconnect coming
from the water reservoir.

Quick-Disconnect

Water Dispenser Tube

10. Remove the retaining clip and water tub-

ing from the water dispenser housing and
pull the end of the tube off the housing.

11. Pull the water dispenser tubing out of the

channel in the refrigerator liner.

Water Dispenser Tube

Clip

Water Reservoir

Содержание KBFA20ER





































































Результаты поиска

Содержание KBFA20ER

Отзывы:

Бренды по названию

Популярные бренды

KitchenAid KBFA20ER, Техническое образование

Результаты поиска

Содержание KBFA20ER

Отзывы:

Бренды по названию

Популярные бренды