KiSS ORCA SPIRIT Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 124

background image

www.kissrebreathers.com

email:

[email protected]

phone: 1 479 739 7726

Minimum Training Standards SFN 180 R.0

13

TRIMIX CCR DIVER 60m

INTENT

The intent of the CCR Trimix 60m Diving program is to provide divers with the training necessary to independently plan and conduct

unit specific multiple-stop decompression dives to depths of up to 60m/196 feet using trimix with a minimum of 16% oxygen and

utilizing CCR diving procedures with a buddy diving on a rebreather or diving open circuit.

REQUIRED INSTRUCTOR RATING

An active status unit specific CCR Trimix 60m Diving Instructor or higher may conduct the unit specific CCR Trimix 60m Diving

program.

TEACHING RATIOS

• The maximum number of students for CCR training is 3:1

This ratio should be reduced as required if the situation and/or environmental conditions call for it.

STUDENT PREREQUISITES

• Decompression CCR Diver
• Have logged a minimum of 50 CCR dives over a minimum of 50 hours, including at least 20 dives deeper than 30m/98 feet and

at least ten (10) dives requiring staged decompression.

• At least 25 dives / 25 hours are required on the specific unit.
• Minimum Age: 18

DURATION

• Minimum hours for course completion: 40
• Minimum number of days: 4

MATERIALS AND EQUIPMENT

The minimum required student and Instructor equipment for this program includes:

A complete CCR Unit that:

• Is compliant to local laws, is approved by the training agency, is properly functioning and is appropriate for bailout and

accelerated decompression diving

• Has no non-manufacturer approved modifications
• Depth gauge & bottom timer, or dive computer
• Two off-board stage cylinders, one for bottom bailout, one for decompression suitable for a safe return to the surface including

all safety and decompression stops in the event of an emergency

• Backup OC/CCR computer for bailout in the event of a system failure
• For Open water and lake environments with the exception of cave, a Delayed Surface Marker Buoy (DSMB) and spool / reel

appropriate for the planned dive depth

• A back up Delayed Surface Marker Buoy (DSMB) and spool / reel appropriate for the planned dive depth
• Backup mask
• Cutting device
• Access to appropriate gas analyzers

All skills must be demonstrated by the instructor on the specific unit being trained.

The minimum required student and instructor materials for this program includes:

• KISS Rebreather unit specific user manual
• Agency student training manual or online training course

«
...
80
81
82
83
84
...
»

Содержание ORCA SPIRIT





























































































































Отзывы:

Нет отзывов

Похожие инструкции для ORCA SPIRIT

Бренд: ABB Страницы: 8

DigitalFlow GF868

Бренд: GE Страницы: 80

Бренд: Oceanic Страницы: 68

Бренд: Oceanic Страницы: 24

Бренд: P3 International Страницы: 2

Бренд: PAT Страницы: 57

Бренд: YOKOGAWA Страницы: 16

Бренд: Det-Tronics Страницы: 18

Бренд: HBM Страницы: 84

Бренд: Sur-Gard Страницы: 12

Бренд: FM Marin Страницы: 8

Thermo Scientific iCE 3000 Series

Бренд: ThermoFisher Scientific Страницы: 42

Ocean Optics HR2000 Series

Бренд: Halma Страницы: 42

Бренд: NARDA Страницы: 240

EUROGRAND EG2080

Бренд: Behringer Страницы: 34

Бренд: YOKOGAWA Страницы: 169

Бренд: Nahita Страницы: 2

Бренд: Keysight Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды