KiSS ORCA SPIRIT, Руководство пользователя

Страница: 12 / 124

12 MSL 72.161 Jetsam/Orca Spirit manual R.5
Assembly
This sec on will discuss the full assembly of your KISS OS; It assumes your scrubber canister has been filled and is ready
to dive. The next sec on will discuss scrubber packing.
O‐Ring Installa on:
As men oned earlier in the manual, all the O‐rings for the KISS OS have been installed. As each sec on is discussed, O‐
ring placement will be men oned when required. At the back of this manual you will find a recommended spare parts
sheet. There you will find a list of the O‐ring names and what kit configura ons are available.
As with any piece of scuba diving equipment, the various components and O‐rings should be checked annually, and
serviced as required. For those doing extensive diving, the various components and O‐rings should be checked more
frequently. Servicing of your KISS OS can be done by you, your dealer, or the parts can be returned to us.
*NOTE: ALL O‐RINGS SHOULD BE LIGHTLY LUBRICATED!! DO NOT USE EXCESS AMOUNTS OF LUBRICANT; THE O‐
RINGS SHOULD ONLY BE SLIGHTLY SHINY.
Inspect:
With the unit stripped, first inspect all LP hoses, fi ngs, the manifold, and components a ached to
the frame of the unit. Ensure that they are in proper working order, that the LP hoses are not dam‐
aged, all connec ons are ght, threaded rods are straight and clean and nothing is damaged.
Manifold:
You will see the manifold located in between the 2 scrubber canister’s on the back of the unit. During
assembly the manifold and LP hoses need only to be inspected prior to diving.
If you are required to change one of the LP hoses, the scrubber canister’s will need to be removed
from the unit so that the area is accessible. In order to make it easier to work with these hoses a set
screw has been placed which locks the manifold in place. You can see the set screw on the front of
the plate when the wing/harness is removed. See photo.
Simply loosen the set screw slightly and the manifold can be moved. Be certain to slide the manifold
back to its original posi on, and to ghten properly when finished.
The LP hoses secured to the manifold are as follows:

Bo om: This is the Off‐Board Accessory which is connected to the side mounted diluent (bailout) cylinder. This LP
hose is 30 inch.

Top of manifold, back right: ADV, 9 inch

Top of manifold, back le : Wing infla on, 30 inch

Top of manifold, front centre: BOV, 32 inch (included when BOV is ordered from KISS)
Canisters:

At this point, your scrubber canisters are full, with the heads secured. (see the
scrubber filling sec on for filling & head placement instruc ons)