KiSS ORCA SPIRIT, Руководство пользователя

Страница: 11 / 124

11 MSL 72.161 Jetsam/Orca Spirit manual R.5
Unpacking & Disassembly
Congratula ons! You have just received your KISS Orca Spirit; the first thing to do is en‐
sure that all the parts you ordered, are included in the box. As you know, the KISS OS can
be shipped either as the BASIC unit or with various components added. Please see the
previous parts page for a list of what is included with the BASIC kit, and what the op onal
extras are. Go through the box and ensure that everything that you ordered has arrived.
Small items can be lost in bubble wrap so ensure that you look carefully in the packing ma‐
terial also.
The OS ships with all the O‐rings installed and the unit is assembled. The following instruc‐
ons are for disassembling the OS.

Remove the back cover. Remove the wing/harness from the front of the unit, by loos‐
ening the fi ng’s, and se ng them aside. The counterlung’s will slide through the
slots and stay a ached to the unit.

You will see that the Sensor Head is secured to the Scrubber Canister using a threaded
ring. Loosen the Sensor Head by turning the ring le . Once the ring has been disen‐
gaged, pull the head up to free it from the scrubber canister. The ring will spin freely
once clear of the threads.

On the Gas Addi on Head you will see that there is a LP hose a ached to an elbow
secured to the Automa c Diluent Valve ‐ ADV. Loosen & remove the elbow from the
ADV, and then loosen the ring from the Scrubber Canister and pull the head up to remove it.

Inside the Scrubber canister you will see the securing screens. Pull them out and lay them aside.

Loosen & remove the first stage regulator from the cylinder. (if ordered)

Loosen the Fastex clamp which is securing the cylinder and remove the cylinder.

You will see that 2 black circ clips are secured to the cross bar, and a ached to each other by a length of twine.
Pull the circ clips out of their slots and set aside.

The crossbar can now be pulled free from the bo om of the scrubber canister. While holding the canister firmly,
pull the bar straight down.

The counterlung’s are secured to the crossbar. Turn the CL rings to loosen the lungs and pull them off the bar. Set
aside.

Lay the OS down, scrubber side up. Loosen the Fastex clamps securing the canisters and remove them.

The BOV will be packaged separately (if ordered), along with the loop hoses.

The display will be packaged separately (if ordered), however if the cable is ordered, it will be secured to the
scrubber head.
The unit is now disassembled. Further sec ons of this manual will discuss, assembly, scrubber packing, sensor installa‐
on & displays, and trouble shoo ng.