6
VISION 1460 OWNER’S GUIDE
MAIN FEATURES
Some cars don’t support the automatic trigger bypass feature of the
1460. In that case you will need to first Unlock/Disarm before you can
use your factory Trunk Release feature (otherwise the siren will trigger).
NOTE
If you have a Trunk Release button on your
factory remote, pressing it while the 1460 is
Armed will bypass the doors/trunk for 5 sec-
onds.
The Shock Sensor will be bypassed until you
close the trunk. The Ignition switch is never by-
passed. Five(5) seconds after you close the trunk,
the shock sensor will be automatically re-activated.
TRUNK RELEASE BYPASS
The siren will blast for 30s when any door is opened
while the system is Armed. Vehicle hazard lights may
also flash.
See bottom half of page 4 on how to Disarm
in this case. Also see Table-1, pg.9.
2-STAGE SHOCK SENSOR
1st Stage (“Warning Chirps”).
Each time the Shock
Sensor detects a light impact to the vehicle body, the si-
ren will chirp 5 times.
The Shock Sensor will not trigger
the siren while in Sensor Bypass Mode.
2nd Stage (“Full Trigger”).
When the Shock Sensor de-
tects a hard impact to the vehicle body, the siren will
blast for 30s (or until Disarmed with the factory remote).
The Shock Sensor will not trigger the siren while in Sen-
sor Bypass Mode. Also see Table-1, pg.9.
See page 15 for common shock sensor problems and solutions.
5 Chirps
30s Blast
The siren will blast for 30s when the trunk is opened
(without the remote) while the system is Armed. Ve-
hicle parking lights may also flash.
See bottom half of
pg.4 on Disarming in this case. Also see Table-1, pg.9.
TRUNK TRIGGER
DOOR TRIGGER
TRUNK
