background image

1

© 2015 KIRAMEK, INC.

Limited Lifetime Warranty

The VISION 1460 

Control Module

 is backed by a limited lifetime war-

ranty against defective components and/or improper product assembly 

to the original purchaser for as long the vehicle is owned by that same 

purchaser, contingent upon installation by an Authorized VISION Deal-

er.  All product warranties become void if the VISION 1460 system was 

not sold and installed by an Authorized VISION Dealer or the system 

is moved to another vehicle.  

All other parts and/or accessories

 that 

connect to VISION 1460 systems, including but not limited to the Siren, 

Shock Sensor and LED Program Switch, are warranted for one (1) year 

from the original date of purchase.   

During the warranty period, Kiramek Inc. will repair or replace, at its 

sole discretion, any system component that is found defective in mate-

rial or assembly during the warranty period, provided that the product 

is returned to Kiramek Inc. by an Authorized VISION Dealer and is ac-

companied by a clear and legible copy of the original purchaser’s receipt. 

Any  damage  to  your  VISION  1460  system  that  results  from  normal 

wear-and-tear, accidents, improper use, neglect, faulty wiring, incorrect 

installation, modification, removal or defacement of the product serial 

number, alteration or repair outside Kiramek Inc or its Authorized VI-

SION Dealers immediately voids this warranty.

This  warranty  is  limited  to  defective  parts  only  and  does  not  provide 

any compensation whatsoever for damages associated with the VISION 

1460 system or its accessories.  This warranty does not cover installa-

tion  labor,  product  removal  and/or  reinstallation  fees.    This  warranty 

is valid for the original purchaser only and may not be transferred to 

another party. Kiramek Inc makes no warranty against theft or vandal-

ism of the vehicle in which the VISION 1460 system was installed. This 

warranty shall not be interpreted as an insurance policy against loss, 

nor  shall  Kiramek  Inc  be  liable  any  in  way  for  such  loss,  financial  or 

otherwise.

WARNING!

 DO NOT ATTEMPT TO INSTALL THIS VISION 1460 PRODUCT YOUR-

SELF  BECAUSE  SUCH  WILL  IMMEDIATELY  VOID  THE  WARRANTY.    THIS  SECU-

RITY  SYSTEM  MUST  BE  PROFESSIONALLY  INSTALLED  BY  YOUR  AUTHORIZED 

VISION DEALER TO VALIDATE YOUR WARRANTY.

KIRAMEK may opt to validate the above Warranty, in writing, for shipments outside Ja-

pan, in cases where there is no local VISION Dealer available to perform the install.

Содержание 1460 series













































Отзывы: