12
VISION 1460 OWNER’S GUIDE
When set to
ON
, parking lights will illuminate for safety while the Ignition
is turned on by a remote start system.
(This feature only works if program
the Ignition Trigger to
RSCM
.)
4
Safety Lights During Remote Start
This feature automatically Arms the system when you do the following:
(1) turn Ignition ON & OFF then (2) Open & Close any Door. Upon seeing
these events, the system will Arm 20s after the last door is closed. The
doors will NOT be locked so you won’t be locked out if you leave your keys
in the car, but the system will be Armed and will trigger if a door is opened.
8
Auto Arm
programmable features
When set to
IG Protect Mode
(default), the system will trigger the siren
when the Ignition (IG) turns ON while Armed, as described on page 7.
When set to
RSCM (Remote Start Compatibility Mode)
, the system will by-
pass the Shock Sensor and Ignition triggers when the Ignition turns ON
while Armed, as described on page 7.
3
Ignition Trigger
7
Safety Lights: Flashing or Solid-ON
When set to
Flashing
, vehicle parking lights will flash for safety while a 3rd
party remote start system is active (remotely running the engine). And
when left set to the factory default of
Solid-ON
, parking lights illuminate
continuous (without flashing) when the remote starter is active.
9
Siren Output
When set to
Continuous
(default), the system will feed a continuous
(+)12v output to sound the included siren for 30s (Full Trigger).
When set to
Pulsed
, the system will feed a pulsed (+)12v (3A max.) output.
This can be used to create a unique siren sound with the included siren (if
you cut the Blue loop wire on the siren), or used when connecting to the
vehicle’s horn by an optional relay.
You cannot Arm if IG is ON in IG Protect Mode
