© 2015 KIRAMEK, INC.
14
FACTORY KEYLESS REMOTE WAS LOST, DISARMING
If the factory remote was lost, you may not be able to Disarm if you have
a Push Start car that requires the factory remote to turn on the Ignition.
In such a case, you must to contact your dealer for a replacement factory
remote. But if you have an older turn-to-crank style Ignition, you can
Disarm the 1460 by Manual Disarming, as described on page 5.
SOMETIMES CAN’T ARM/DISARM WITH THE FACTORY REMOTE
•
On some cars, if you rapidly press Lock and Unlock on the factory re-
mote, the 1460 may stop responding to the remote. In this case the fix
is simple —
just wait longer between Lock and Unlock presses.
•
If Confirmation Chirps (pg.3) are enabled, did you hear a single siren
chip when you tried to Arm? If not, the Ignition may be ON. You can-
not Arm the system while the Ignition is ON while in IG Protect Mode
(see “Ignition Trigger” atop page 12).
THE SYSTEM IS DEFINITELY ARMED, BUT IT WON’T TRIGGER THE SIREN!
•
It may be in Valet Mode. See page 10.
•
It may be in Sensor Bypass Mode. See page 3.
SIREN BLASTS WHEN THE TRUNK IS OPENED
•
You cannot open the trunk with the key or the siren will sound. Use
your factory remote. If your keyless remote doesn’t have a trunk open
feature, then you need to Disarm the system first (Unlock button on
your factory remote) and then open the trunk.
•
If you open the trunk with your factory remote and the siren triggers,
it could be the trunk release timing is too long. After pressing Trunk
Release on your factory remote, the trunk must open within 5s or the
siren will sound.
•
Some cars simply have a trunk release feature that is
incompatible
with the 1460. In this case, first Unlock/Disarm,
then
open the trunk.
I HAVE PROBLEMS WHEN MY TURBO TIMER IS USED
The 1460 is incompatible with all Turbo Timers. Only Remote Starters
are supported (see pages 7 & 11-12).
CANNOT DISARM WHILE THE SIREN IS SOUNDING
•
Perform the 4 steps given at the bottom of page 4.
•
Ensure all doors, the hood & trunk are closed, then Unlock to Disarm.
•
Your factory remote’s battery may be dead. Use Manual Disarming (p5).
TROUBLESHOOTING
