background image

BENCHMARK SCHEME

The installer must follow the Benchmark code of practice for the Benchmark certification 

to be valid. The Benchmark code of practice can be found on the internet using the 

following internet site www.centralheating.co.uk and follow links. 

Kingspan is a licensed member of the Benchmark Scheme which aims to improve the 

standards of installation and commissioning of domestic heating and hot water systems in 

the UK and to encourage regular servicing to optimise safety, efficiency and performance.

Benchmark is managed and promoted by the Heating and Hotwater Industry Council. For 

more information visit www.centralheating.co.uk

Please ensure that the installer has fully completed the Benchmark Checklist on the inside 

back pages of the installation instructions supplied with the product and that you have 

signed it to say that you have received a full and clear explanation of its operation. 

The installer is legally required to complete a commissioning checklist as a means of 

complying with the appropriate Building Regulations (England and Wales).

All installations must be notified to Local Area Building Control either directly or through 

a Competent Persons Scheme. A Building Regulations Compliance Certificate will then 

be issued to the customer who should, on receipt, write the Notification Number on the 

Benchmark Checklist. This product should be serviced regularly to optimise its safety, 

efficiency and performance. The service engineer should complete the relevant Service 

Record on the Benchmark Checklist after each service. The Benchmark Checklist will be 

required in the event of any warranty. 

H3

KINGSPAN ALBION  

RELIABLE HOT WATER CYLINDERS  

Содержание AUXD120





























Отзывы: