14
THERMOSTAT WIRING DIAGRAMS
уϭϮΣ
ϲϴΣ
цϯ͘ϱΣ
уϱϱΣ
>&d,Ed,ZDK^dd;/ĨĮƩĞĚͿ͗K/>ZKEdZK>
Z/',d,Ed,ZDK^dd͗/DDZ^/KE,dZKEdZK>
dŚĞƌŵŽƐƚĂƚͬƐƉƌĞ
-
ƐĞƚƚŽĂƉƉƌŽdžŝŵĂƚĞůLJϱϱΣ͘
dŚĞŽƵƚůĞƚǁĂƚĞƌƚĞŵƉĞƌĂƚƵƌĞƐŚŽƵůĚďĞĐŚĞĐŬĞĚĂŶĚƚŚĞ
ƚŚĞƌŵŽƐƚĂƚĂĚũƵƐƚĞĚĂĐĐŽƌĚŝŶŐƚŽƚŚĞĐLJůŝŶĚĞƌĐŽŵŵŝƐƐŝŽŶŝŶŐ
ƉƌŽĐĞƐƐ͘
,ŝŐŚůŝŵŝƚĐƵƚŽƵƚŽƉĞƌĂƟŶŐƚĞŵƉĞƌĂƚƵƌĞ͗ϴϵΣнϬ
-
ϭϬΣ
dŚĞƌŵŽƐƚĂƚƐǁŝƚĐŚƌĂƟŶŐ͗ϮϬΛϮϱϬs
h^Z/E&K͗/ĨƚŚĞŚŝŐŚůŝŵŝƚƚŚĞƌŵŽƐƚĂƚƚƌŝƉƐ͕ŝƐŽůĂƚĞĂůůĞůĞĐƚƌŝĐĂůƐƵƉͲ
ƉůŝĞƐĂŶĚĐŽŶƚĂĐƚLJŽƵƌĐLJůŝŶĚĞƌŝŶƐƚĂůůĞƌ͘
ĚũƵƐƟŶŐƚĞŵƉĞƌĂƚƵƌĞƐĞƫŶŐƐĂŌĞƌĐŽŵŵŝƐƐŝŽŶŝŶŐŵĂLJĐĂƵƐĞǁĂƚĞƌ
ƚŽƌĞĂĐŚƐĐĂůĚŝŶŐƚĞŵƉĞƌĂƚƵƌĞƐĂƚƚŚĞŽƵƚůĞƚƐ
The diagrams below show the wiring within the thermostat box for indirect and direct cylinders respectively.
The thermostat mounted on the right controls the immersion heater.
The thermostat on the left switches the controls for the primary heat exchanger.
On reciept the thermostat probes will inserted into the thermostat pockets on the immersion heater. The immersion heater
thermostat probes should alway be inserted in the upper thermostat pocket on the immersion heater and the primary heating
thermostat probes should always be inserted into the lower thermostat pocket on the immersion heater.
Connect immersion heater supply right terminal block as detailed inside enclosure
Pre-plumbed cylinders will already be connected to the primary circuit thermostat. Use wiring diagram on previous page to
connect to thermostat
KINGSPAN ALBION
RELIABLE HOT WATER CYLINDERS