King gates MINIMODUS, Инструкции по установке и использованию, предупреждения

Страница: 13 / 52

13
EN
3.4 - Installation preparation works
Fig.2 shows an example of an automation system using
King-Gates components. These components are positioned
following a typical and standard setup.
With reference to Fig.2, establish the approximate position where
each component will be installed and then arrange any conduits
for the electrical wiring.
3.3 - Use limitations
Before installing the product, check that the size and the weight
of the gate leaf are within the limits stated in chart 1.
kg - Maximum gate leaf weight
mm - maximum gate leaf length
m
WARNING! The single leaf must not exceed 2m in
length.
Useful components for a complete system:
1. MiniModus MA gear motor
2. MiniModus SL gear motor
3. Transmitter
4. Column photocells
5. Photocells
6. Flashing light
7. Key or digital selector
6
3
1 2
5
7
4
LENGTH OF THE CABLE < 10 metres from 10 to 20 metres from 20 to 30 metres
Power supply 230V 3G x 1,5 mm
2
3G x 1,5 mm
2
3G x 2,5 mm
2
Motor power supply 24V 2G x 1,5 mm
2
2G x 1,5 mm
2
2G x 2,5 mm
2
Photocells (TX) 2 x 0,5 mm
2
2 x 0,5 mm
2
2 x 0,5 mm
2
Photocells (RX) 4 x 0,5 mm
2
4 x 0,5 mm
2
4 x 0,5 mm
2
Key switch 2 x 0,5 mm
2
2 x 0,5 mm
2
2 x 0,5 mm
2
Safety ribbon 2 x 0,5 mm
2
2 x 0,5 mm
2
2 x 0,5 mm
2
Flashing light 2 x 1,5 mm
2
2 x 1,5 mm
2
2 x 1,5 mm
2
Antenna (integrated into the flashing light) RG58 RG58 RG58
250
150
200
100
50
X (kg)
Y
(m)
1.1 1.2 1.3 1.4 1.5 1.6 1.7 2 1.8 1.9
FIG.2
Chart 1 - Use limitations