➢
Modify the name with the keypad: press
OK
to validate.
➢
Press the
“OK”
function key to validate the operator name.
The analyser backs to the list of current operators.
➢
Press
Esc
to quit the screen.
5.6.3. Delete an operator
“Setting”
screen is displayed
.
➢
Go to
“Operator”
with the keypad then press
OK
.
➢
Go to the operator to delete with the keypad.
➢
Press the
“Delete”
function key.
➢
Press
Esc
to quit the screen.
5.7. Back to factory setting of the analyser
It is possible to set the analyser with its factory setting.
“Setting > Instrument”
screen is displayed
.
➢
Press the
“Factory setting”
function key.
A message is displayed and asks to confirm the return to factory settings.
➢
Go to
“OK”
with the keypad then press
OK
.
➢
Press
Esc
or go to
“Cancel”
with the keypad then press
OK
.
5.7.1. Units and values of measurement settings of the factory setting
•
Temperature:
°C
•
Draft:
Pa
•
Differential pressure:
mbar
•
CO:
ppm
•
CO
2
:
%
•
NO:
ppm
•
NOx:
ppm
•
CH
4
:
ppm
•
CO (O
2
):
mg/m
3
•
NO (O
2
):
mg/m
3
•
NOx (O
2
):
mg/m
3
Alarm thresholds:
•
O
2
:
3.0 %
•
CO:
100 ppm
•
Amb. CO:
10 ppm
•
CH
4
:
1200 ppm
•
Air excess (λ):
1.10
•
Flue gas temperature (Tf):
250.0 °C
Reference:
•
O
2
:
21.0 %
•
Altitude:
800 m
•
Atmospheric pressure:
1013.25 hPa
CO protection threshold:
2000 ppm
Auto-zero and purge duration:
1 minute
Created operators and combustibles will be deleted. Created customers, boilers and inspections on boilers are not
deleted after a return to factory setting.
5.7.2. Device factory setting
Back-light:
7
Auto-off:
15 minutes
Language:
French
Print:
long ticket, logo display deactivated and empty headers
Visual help:
ON (activated)
Alarm audio parameter:
Alarm 1
Groups:
OFF (deactivated)
Bluetooth (option):
deactivated
22
Set the different parameters of the analyser
