2. Safety
2.1. Precautions for use
Please always use the device in accordance with its intended use and within parameters described in the technical features
in order not to compromise the protection ensured by the device.
2.2. Symbols used
For your safety and in order to avoid any damage of the device, please follow the procedure
described in this user manual and read carefully the notes preceded by the following symbol:
The following symbol will also be used in this user manual:
Please read carefully the information notes indicated after this symbol.
2.3. Safety instructions
The following safety instructions have to be strictly observed.
Not respecting these safety instructions can lead to a loss of warranty.
•
The analyser should not to be used in and under water.
•
The analyser should not to be placed near or directly at open fire or heat.
•
The indicated range of temperature of the probe is not to be exceeded, as the probe and temperature
sensor could be destroyed.
•
After measurements, before packing the analyser, wait for the probe to be cold. As long as it is hot, the
probe could cause injuries.
•
The exhalations of alcohol liquids (lubricants, petrol, spirit, vanish...) may damage the sensors of the
analyser. Therefore, it is forbidden to preserve or use these fluids nearby the analyser.
•
Load the battery only with Kimo charger. The charger must be used only for the power supply loading. Use
another type of charger can damage the battery and the analyser and can cause electrical shocks.
Safety
13
