KIKKA BOO PINE, Инструкция по эксплуатации

Страница: 5 / 30

WARNING
THANK YOU FOR CHOOSING OUR PRODUCT. PLEASE ALWAYS READ ALL THE INSTRUCTIONS POVIDED CAREFULLY BEFORE USE.
• Your child's safety may be affected if you don't follow these instructions.
• The stroller is suitable for children under 36 months. The max load of the stroller is 15kg. Never overload.
• Do not use if any part is broken.torn or missing .
• Use a harness as soon as your child can sit unaided.
• It may be danagerous to leave your child unattended.
• Accessories which are not approved by the manufacturer shall not be used.
• Avoid placing the stroller near naked heat sources such as electric bar fires, gas fires, etc. or where a child could gain access to any other kinds of hazards.
• Always use the crotch strap in combination with the waist belt.
• Always use the harness provided and make sure the harness is correctly fitted.
• Any load attached to the handle affects the stability of the stroller.
• Ensure that all the locking devices are engaged before use.
• This product is not suitable for running or skating
• To avoid injury ensure that your child is kept away when unfolding and folding this product.
• Do not let your child play with this product.
• Use the stroller for only one child at a time.
• The maximum permissible loading for shopping basket is 5 kg.
1. PART LIST: A. Front wheel; B. Rear wheel assembly; C. Bumper bar; D. Frame with fabric cover;
ASSEMBLY
2. Unfold frame: Release the folding lock, then open the frame and take out the bumper bar and rear wheel assembly. Open frame fully until ' click' sound is
heard (Figure 2).
3. Assemble the front wheel: Press down the lock pin on the front tube, then insert the front tube into the adaptor of front wheel, until the lock pin position in
the plastic hole. To disassemble: Press down the lock pin and pull the wheel set out (Figure 3).
4. Assemble Rear Wheels: Insert rear tube into the rear wheel plastic house until hear ' click' .
To disassemble: Press down the lock pin as picture and pull the rear wheels out (Figure 4).
WARNING: Please ensure the lock pin has been fully locked in the plastic house.
5. Assembly the bumper bar: Insert the end of the bar to each adaptor into each side of the hinge until hear a ”click” (Figure 5).
6. Disassemble: Press down the release button on each side (Figure 6), then pull of the bumper bar.
USING THE SAFETY HARNESS
7. Please ensure the safety harness is always used, ensuring the child’s back is secured against the back of the seat. Ensure the harness fits your child securely; if
necessary, alter the length of the shoulder, waist, or crotch straps using the adjusters provided(Figure 7).
8. ADJUST THE BACKREST: With one hand, hold the end of the webbing strap. With the other, pinch the adjusting buckle and pull strap to move backrest to
desired position (Figure 8).
9. USE THE FRONT SWIVEL LOCK: To apply press down the swivel lock lever and fix it into the base notch. To release, pull the lever upwards (Figure 9).
10. LINK BRAKE BAR OPERATION: To brakes simply press down the link brake bar located on the rear wheels with your foot; To release the brakes simply lift the
link brake bar located on rear wheels (Figure 10). WARNING: PLEASE ALWAYS APPLY PARKING BRAKE WHEN YOU STOP MOVING.
11. ADJUST CANOPY: Pull the canopy forward or backward to desired position(Figure 11).
12. ADJUST LEG REST: Press the trigger on each side of the leg rest to release, then move to desired position. Release trigger to lock in place (Figure 12,13).
FOLDING OPERATION
Please firstly adjust the backrest to the flat position before folding the pushchair. Next ensure canopy is closed and shopping basket is empty. Use your
forefingers to pull the folding locks on both sides of the stroller to release the folding mechanism. To fold, press the handle downwards. Once folded, ensure the
folding lock is engaged (Figure 14,15,16).
CARE AND MAINTENANCE
This stroller was designed and manufactured with quality materials and craftsmanship. Always use the safety harness. Lubricate moving parts reg.
Inspect regularly for: worn parts, torn materials or stitching, loose screws , bent or broken frame parts, broken, damaged or missing parts.
Fabric parts may be cleaned in accordance with the fabric care labels. Do not machine wash.
Seat: Sponge clean only.
Canopy/Basket: Hand wash only.
Do not leave the stroller exposed to heat as a radiator orgin direct sunlight.
If the stroller chassis parts have been exposed to salt water we recommend that they be rinsed down with soapy water as soon as possible, afterwards clean with
a sponge. Do not fold or store the product while wet and never store a damp environment as this can cause mildew to form.
ENGLISH