Keysight P9241 Скачать руководство пользователя страница 2

Страница: 2 / 1344

Keysight P9241/42/43A Oscilloscopes SCPI Programmer's Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including

electronic storage and retrieval or

translation into a foreign language) without

prior agreement and written consent from

Keysight Technologies, Inc. as governed by

United States and international copyright

laws.

Revision

Version 07.30.0000

Edition

May 15, 2019

Available in electronic format only

Published by:

Keysight Technologies, Inc.

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Warranty

The material contained in this document is

provided "as is," and is subject to being

changed, without notice, in future editions.

Further, to the maximum extent permitted

by applicable law, Keysight disclaims all

warranties, either express or implied, with

regard to this manual and any information

contained herein, including but not limited

to the implied warranties of

merchantability and fitness for a particular

purpose. Keysight shall not be liable for

errors or for incidental or consequential

damages in connection with the furnishing,

use, or performance of this document or of

any information contained herein. Should

Keysight and the user have a separate

written agreement with warranty terms

covering the material in this document that

conflict with these terms, the warranty

terms in the separate agreement shall

control.

Technology License

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in

accordance with the terms of such license.

U.S. Government Rights

The Software is "commercial computer

software," as defined by Federal Acquisition

Regulation ("FAR") 2.101. Pursuant to FAR

12.212 and 27.405-3 and Department of

Defense FAR Supplement ("DFARS")

227.7202, the U.S. government acquires

commercial computer software under the

same terms by which the software is

customarily provided to the public.

Accordingly, Keysight provides the Software

to U.S. government customers under its

standard commercial license, which is

embodied in its End User License Agreement

(EULA), a copy of which can be found at

www.keysight.com/find/sweula

. The

license set forth in the EULA represents the

exclusive authority by which the U.S.

government may use, modify, distribute, or

disclose the Software. The EULA and the

license set forth therein, does not require or

permit, among other things, that Keysight:

(1) Furnish technical information related to

commercial computer software or

commercial computer software

documentation that is not customarily

provided to the public; or (2) Relinquish to,

or otherwise provide, the government rights

in excess of these rights customarily

provided to the public to use, modify,

reproduce, release, perform, display, or

disclose commercial computer software or

commercial computer software

documentation. No additional government

requirements beyond those set forth in the

EULA shall apply, except to the extent that

those terms, rights, or licenses are explicitly

required from all providers of commercial

computer software pursuant to the FAR and

the DFARS and are set forth specifically in

writing elsewhere in the EULA. Keysight

shall be under no obligation to update,

revise or otherwise modify the Software.

With respect to any technical data as

defined by FAR 2.101, pursuant to FAR

12.211 and 27.404.2 and DFARS 227.7102,

the U.S. government acquires no greater

than Limited Rights as defined in FAR 27.401

or DFAR 227.7103-5 (c), as applicable in any

technical data.

Safety Notices

CAUTION

notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION

notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly

performed or adhered to, could

result in personal injury or death.

Do not proceed beyond a WARNING

notice until the indicated

conditions are fully understood and

met.

Содержание P9241

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание P9241

Отзывы:

Похожие инструкции для P9241

Бренды по названию

Популярные бренды

Keysight P9241, Руководство программиста SCPI

Результаты поиска

Содержание P9241

Отзывы:

Похожие инструкции для P9241

Бренды по названию

Популярные бренды