59
Command Reference
System Subsystem
Gateway Setting
:SYSTem:PORT:IP:GWAY <“xxx.xxx.xxx.xxx”>
:SYSTem:PORT:IP:GWAY?
Sets the gateway for the analyzer in the network. The
gateway will be fetched automatically if the IP assignment is
set to DHCP.
Example:
:SYSTem:PORT:IP:GWAY "192.168.0.1"
Key access:
System > More > Port Setting > IP Admin > Gateway
Subnet Mask
:SYSTem:PORT:IP:SMASk <“xxx.xxx.xxx.xxx”>
:SYSTem:PORT:IP:SMASk?
Sets the subnet mask according to the PC network settings.
The subnet mask will be set automatically if the IP
assignment is set to DHCP.
Example:
:SYSTem:PORT:IP:SMASk "255.255.255.1"
Key access:
System > More > Port Setting > IP Admin > Subnet Mask
IP Config Apply
:SYSTem:PORT:IP:APPLy
Use this command to apply all the IP settings according to
the IP assignment settings. If the IP assignment is set to
DHCP, the IP address, gateway, and subnet mask will be set
automatically.
Key access:
System > More > Port Setting > IP Admin > Apply
Erase Memory
:SYSTem:SECurity:ERASe
Use this command to erase all the user data saved in
internal memory. This command is only available when the
option SEC is installed.
Key access:
System > More > Securities > Erase Memory
Содержание N9322C
Страница 6: ...Contents 4 ...
Страница 14: ...Getting Started Remotely Operating the Analyzer 8 ...
Страница 38: ...Status Registers Status Register System 32 ...
Страница 56: ...Programming Example Using Marker Delta Mode and Marker Minimum Search 48 ...