151
Command Reference
Channel Scanner Option Subsystem
Top Cycle
:CHSCanner:SWEep:TOP:CYCLe[:STATe] OFF|ON|0|1
:CHSCanner:SWEep:TOP:CYCLe[:STATe]?
Use this command to turn on/off Top Cycle state. It’s only
available for Top N sweep mode.
:CHSCanner:SWEep:TOP:CYCLe:VALue <value>
:CHSCanner:SWEep:TOP:CYCLe:VALue?
This command set the Top Cycle value.
Range:
1 to 10000
Example:
:CHSCanner:SWEep:TOP:CYCLe:VALue 30
Key access:
Meas > Setup > Top Cycle
Bottom Cycle
:CHSCanner:SWEep:BOTTom:CYCLe[:STATe] OFF|ON|0|1
:CHSCanner:SWEep:BOTTom:CYCLe[:STATe]?
Use this command to turn on/off Bottom Cycle state. It’s
only available for Bottom N sweep mode.
:CHSCanner:SWEep:BOTTom:CYCLe:VALue <value>
:CHSCanner:SWEep:BOTTom:CYCLe:VALue?
Use this command to define the Bottom Cycle value. It’s
only available for Bottom N sweep mode.
Range:
1 to 10000
Example:
:CHSCanner:SWEep:BOTTom:CYCLe:VALue 10
Key access:
Meas > Setup > Bottom Cycle
Scan Start/Stop State Switch
:CHSCanner:SWEep[:STATe] RUN|STOP
:CHSCanner:SWEep[:STATe]?
This command toggles the scan state between start and stop.
Example:
:CHSCanner:SWEep RUN
Key access:
Meas > Scan Start
Содержание N9322C
Страница 6: ...Contents 4 ...
Страница 14: ...Getting Started Remotely Operating the Analyzer 8 ...
Страница 38: ...Status Registers Status Register System 32 ...
Страница 56: ...Programming Example Using Marker Delta Mode and Marker Minimum Search 48 ...