143
Command Reference
Reflection Measurement Option Subsystem
Query Reference Marker X axis Value in Reflection
Measurement
:CALCulate:MARKer[1]|2|3|4|5|6:RX?
This command query current reference marker X axis value.
Example:
:CALCulate:MARKer1:RX?
Query Reference Marker Y axis Value in Reflection
Measurement
:CALCulate:MARKer[1]|2|3|4|5|6:RY?
This command query current reference marker Y axis value.
Example:
:CALCulate:MARKer1:RY?
Marker Peak Search in Reflection Measurement
:CALCulate:MARKer[1]|2|3|4|5|6:PEAK
Use this command to perform marker peak search once.
Example:
:CALCulate:MARKer1:PEAK
Key access:
Shift > Peak > Peak
Marker Valley Search in Reflection Measurement
:CALCulate:MARKer[1]|2|3|4|5|6:VALLey
Use this command to perform marker valley search once.
The maker valley search can find the point with the lowest
value in the current trace.
Example:
:CALCulate:MARKer1:VALL
Key access:
Shift > Peak > Valley
Reflection Measurement Limit Beep State
:CALCulate:MARKer[1]|2|3|4|5|6:CPEak OFF|ON|0|1
:CALCulate:MARKer[1]|2|3|4|5|6:CPEak?
This command turns on/off the limit beep warning state in
reflection measurement.
Example:
:CALCulate:MARKer1:CPEak ON
Key access:
Shift > Limit > Beep
Содержание N9322C
Страница 6: ...Contents 4 ...
Страница 14: ...Getting Started Remotely Operating the Analyzer 8 ...
Страница 38: ...Status Registers Status Register System 32 ...
Страница 56: ...Programming Example Using Marker Delta Mode and Marker Minimum Search 48 ...